- +34 978 850 716
- Mon 8:30-13:30 and 15:00-18:00 · F 8:00-16:00
ESTonetex System
ESTonetex System mortars are not individual products: they are part of a complete system backed by over 30 years of experience, with a presence in more than 60 countries and 100% manufactured in Spain (MADE IN SPAIN). Each mortar is supported by training from the ESTECHA International School of Theming and an active community of over 2.000 students and the Theming Network —we don't just sell the material, we teach you how to master it.
We offer specialized mortars for aquatic environments, ideal for swimming pools, spas, and water parks, as well as mortars compatible with expanded polystyrene (EPS), perfect for lightweight structures or creative decorations. Whatever your project, we have the mortar to suit your needs.
ESTonetex TXT is a thixotropic mortar specially developed for vertical theming of stone, rock, brick, log and wood; indoors and outdoors.
Available in sandstone, white, and gray.
It is the most widely used mortar for theming thanks to its excellent workability and performance. It allows for the easy creation of shapes and volumes without sagging, facilitating the creative process.
Furthermore, its high resistance makes it ideal for both indoor and outdoor use, guaranteeing durability and a flawless finish in any project.
·Thematic mortar that is moldable, moldable and projectable for theming and high decoration; thanks to its composition, it allows for the creation of shapes and volumes with great thicknesses.
·To reproduce natural elements such as stone, wood, rock, trunk or brick on facades, walls, gardens, theme parks, hotels, etc.
·It has great elasticity which allows volumes of up to 20 cm (in several layers) to be made, whether projected by machine or applied by hand.
· Yield of 13,5 kg/m2 at 1 cm thickness (minimum recommended), yield may vary depending on the surface.
·It can be pigmented with both powder patinas and mineral silicate and mineral pigments.
·It can be applied both indoors and outdoors, and is resistant to environmental wear and tear (rain, wind, snow, etc.).
·Always place EST-Mesh 80 gr mesh between layers.
• It has certifications for fire resistance (Euroclass A1, non-combustible material, according to the official technical data sheet) and for urea. Documents are available upon request via the contact form.
·Verified technical data (official technical data sheet): compressive strength >8 MPa and flexural strength >3 MPa at 28 days, CE marking according to UNE-EN 998-1 standard.
·Never apply to surfaces in continuous contact with water such as aquariums, waterfalls, fountains, etc.
·Recommended thickness: minimum 1 cm up to maximum 20 cm.
·Mix with 4,5 – 5L of water, until a homogeneous paste is obtained.
·It is recommended to let the material rest for 5 minutes before applying it.
·Do not apply the material when there is a risk of heavy rain, snow or frost.
·The application temperature ranges between 5ºC and 30ºC; when these temperatures are exceeded, it is advisable to take precautions.
·The mortar can be applied directly onto brick or clay block surfaces, concrete blocks, plaster or metal panels.
·To apply it on plasterboard, concrete, paint or plaster; the surface must be treated beforehand.
·Always apply EST-Mesh 80 gr mesh regardless of the surface.
·To apply large thicknesses, it must be done in several layers.
·It is recommended to apply EST-3 Plus water repellent for greater protection.
·The mortar comes in a double-layered paper bag, weighing 25kg.
·It can be stored for up to 12 months in a place isolated from moisture.
·It is available in sandstone, gray and white.
·Each pallet contains 48 sacks (1.200kg).
ESTonetex Forte is a high-performance, thin-layer, polymer-modified, shrinkage-compensated decorative mortar for application on EPS and XPS.
Formulated with low CO2 emissions cement (20% reduction), available in white.
It allows adhesion to EPS, XPS, concrete or plasterboard with layers from 2 to 15 mm, achieving durable, lightweight decorative finishes with less environmental impact.
It is kneaded only with water; optionally it can be combined with EST-EPS Elastic resin (1:3 ratio) for a specific decorative finish on EPS/XPS.
• Polymer-modified, shrinkage-compensated mortar for thin layer (2 to 15 mm) on EPS/XPS.
·Formulated with low CO2 emissions cement (20% reduction), selected aggregates, organic additives, fibers and synthetic resins.
•High adhesion to EPS, XPS, concrete or plasterboard.
·Waterproof to rainwater and permeable to water vapor.
•High impact resistance and high deformability (absorbs differential stresses in the hardened state).
·Verified mechanical resistance (official technical data sheet): >=9 N/mm² in compression and >=3,5 N/mm² in bending.
·Available in white.
Mix with 6 to 6,5 liters of clean water per 25 kg bag until you obtain a smooth, creamy mixture. Let it rest for 5 minutes before applying.
·For adhesion to EPS/XPS: apply a thickness of 3 to 5 mm, embed fiberglass mesh and cover it with the mortar itself.
·For decorative finish on EPS/XPS: apply a minimum of 3 coats, leaving 2 hours between coats (optionally with EST-EPS Elastic resin in a 1:3 ratio).
·Thickness from 2 to 15 mm.
·Do not apply below 5ºC or above 35ºC, or with risk of frost, rain or strong wind.
·Once dry, pigment with EST-Silcopin, EST-Monocrom or EST-Multipol, and seal with EST-3 Plus water repellent.
·The mortar comes in a 25kg paper bag.
·It can be stored for up to 12 months in its original packaging, under cover and in a dry place.
·Available in white.
·Each pallet contains 48 sacks (1.200kg).
High-performance decorative mortar, designed for large surfaces with excellent on-site productivity and thixotropy for continuous modeling. Ideal for large-scale theming of stone, rock, wood, and logs in theme parks, resorts, zoos, and leisure spaces.
Available in sandstone, white, and gray.
ESTonetex Park stands out for its high productivity on site, allowing for the rapid coverage of large surfaces without compromising on the finishing details. Its thixotropy facilitates the continuous modeling of shapes and volumes, making it the ideal choice for theme parks, resorts, and leisure spaces that require the theming of large areas.
·Thematic mortar that is moldable, moldable and projectable for the theming of large surfaces; thanks to its composition, it allows for the creation of shapes and volumes with great thicknesses.
·To reproduce natural elements such as stone, rock, logs and reliefs in theme parks, tourist resorts, zoos and leisure spaces.
·Minimum thickness 10mm, maximum 50mm per layer, machine projected or hand applied.
·Approximate yield of 14 kg/m² at 10mm thickness.
·It can be pigmented with both powder patinas and mineral silicate and mineral pigments.
·It can be applied both indoors and outdoors, and is resistant to environmental wear.
·Always place EST-Mesh 80gr between layers for thicknesses greater than 50mm.
·Compression resistance class CSIV according to UNE-EN 998-1 (≥6 N/mm²).
·Reaction to fire: Euroclass A1.
·Available in white, gray and sandstone (other colors available upon request) order).
·Never apply to surfaces in continuous contact with water.
·Recommended thickness: minimum 10mm up to maximum 50mm per layer.
·Mix with the corresponding amount of clean water (20-22% by weight) until a homogeneous paste is obtained, without lumps.
·If the application is mechanical (recommended), adjust the water/mortar ratio by trial and error.
·Do not apply the material when there is a risk of heavy rain, snow or frost.
·The application temperature ranges between 5ºC and 35ºC.
·The mortar can be applied directly onto ceramic brick, cement block or plaster in good condition.
·For substrates that are difficult to adhere to, consult the Surface Guide.
·For thicknesses greater than 50mm, apply the product in several layers and reinforce with EST-Mesh 80gr mesh.
·Once the mortar is partially hardened, give the desired finish using theming tools (molds, spatulas).
·Once dry, pigment with EST-Silcopin, EST-Monocrom or EST-Multipol and seal with EST-3 Plus water repellent.
The mortar comes in a paper bag, weighing 25kg.
·It can be stored for up to 12 months in a place isolated from moisture.
·It is available in white, gray and sandstone (other colors available upon request).
·Each pallet contains 48 sacks (1.200kg).
High-thixotropic mortar, based on sulfate-resistant cement, with a high water-repellent content. Ideal for theming waterfalls, swimming pools, fountains, artificial rock, and bathrooms, on surfaces with continuous contact with salt or chlorinated water.
Available in grayish ochre color.
ESTonetex Sulfo is the preferred choice for professionals in projects involving salt or chlorinated water, thanks to its excellent workability and resistance. It allows for the creation of shapes and volumes without sagging, guaranteeing a durable finish even under the most demanding conditions.
·GP CSIV W2 plastering mortar according to UNE-EN 998-1, with high thixotropy, based on sulfur-resistant cement, siliceous and calcareous aggregates, with a large amount of water-repellent material.
·To reproduce natural elements such as stone, rock, wood or trunk, through molding and subsequent stamping.
·Especially suitable for surfaces in contact with salt or chlorinated water, such as swimming pools, waterfalls and showers.
·Minimum thickness 20mm, maximum 60mm per layer, up to a maximum accumulated thickness of 200mm (20cm) in several layers.
·Approximate yield 14 kg/m² at 10mm thickness.
·It can be pigmented with powder patinas, mineral silicate or mineral pigments.
·Always place EST-Mesh 80gr mesh between layers.
·Reaction to fire: Euroclass A1.
·Available in grayish ochre color.
·It can be applied to surfaces in continuous contact with salt or chlorinated water, such as swimming pools, waterfalls, showers, etc.
·Recommended thickness: minimum 20mm up to a maximum of 60mm per layer, up to a maximum accumulated thickness of 200mm (20cm) in several layers.
·Mix with clean water (24-26% of the product weight) until a homogeneous paste is obtained, without lumps.
·It is recommended to let the material rest for 5 minutes before applying it.
·Do not apply the material when there is a risk de powerful rains, snow o frosts.
·The temperature de enforcement oscillates across 5ºC y 35ºC.
·He mortar can apply directly about surfaces de brick ceramic, block de cement o plastered en good terms.
·For Media de difficult adherence, on request la Travel Guide de Surfaces.
·There is that apply always malla de fiber de glass all with thicknesses higher then a 60mm.
·He treatment superficial se done across 2 y 12 hours after de la application, According to terms.
·Advisable pigment with EST-Silcopin, EST-Monochrome o EST-Multipol y apply waterproof EST-3 Plus all with Most protection.
·The mortar comes in a paper bag, weighing 25kg.
·Can be stored until 12 months en un place isolated de la humidity.
·This available en color ocher grayish.
·Each pallet contains 48 bags (1.200kg).
It is a thixotropic mortar specially developed for theming work in immersion with salt or chlorinated water.
Available in sandstone color.
It is additive with the mineral silicate EST-26 Multilite (1 part EST-26 x 5 parts water).
ESTonetex Extreme is the only thixotropic mortar on the market specifically designed for theming areas in continuous contact with water, such as aquariums, ponds, or water parks. Its formulation, reinforced with EST-26 Multilite mineral silicate, guarantees exceptional strength and durability, even under the most demanding conditions.
It offers excellent handling, allowing the creation of shapes and volumes without risk of sagging, and stands out for its great resistance to chlorinated and salt water, ensuring a solid and durable finish in any aquatic environment.
·Thematic mortar that is moldable, moldable and projectable for theming, thanks to its composition it allows for the creation of shapes and volumes with great thicknesses.
·The mortar is added with EST-26 Multilite mineral silicate (1 part of EST-26 Multilite x 5 parts of water), the resulting mixture is added to the mortar.
·To reproduce natural elements such as stone, rock, wood or trunk in areas immersed in or in continuous contact with water such as aquariums, fountains or waterfalls.
·It has great elasticity which allows volumes of up to 20 cm (in several layers) to be made, whether projected by machine or applied by hand.
· Yield of 18-20 kg/m2 at 1 cm thickness, yield may vary depending on the surface.
·It can be pigmented with both powder patinas and mineral silicate and mineral pigments.
·It can be applied both indoors and outdoors, and is resistant to salt and chlorinated water.
·Always place EST-Mesh 80 gr mesh between layers.
• Verified mechanical resistance (official technical data sheet): 24,17 N/mm² in compression and 6,08 N/mm² in bending (28 days), tripling the standard norm of 6 N/mm². Reaction to fire Euroclass A.
·It can be applied to surfaces in continuous contact with water such as aquariums, waterfalls, fountains, etc.
·Recommended thickness: 20 to 60 mm per coat/layer, up to a maximum accumulated thickness of 20 cm in several layers.
·Mix with 4,5 – 5L of mixture (EST-26 Multilite + water), until a homogeneous paste is obtained.
·It is recommended to let the material rest for 5 minutes before applying it.
·Do not apply the material when there is a risk of heavy rain, snow or frost.
·The application temperature ranges between 5ºC and 30ºC; when these temperatures are exceeded, it is advisable to take precautions.
·The mortar can be applied directly onto surfaces of EST-Mesh 80 gr mesh, plastic mesh, nervometal, brick or thermoclay.
·If applying to concrete surfaces, they must be treated beforehand.
·To apply large thicknesses, it must be done in several layers.
·The EST-3 Plus water repellent must be applied once the work is completed.
·The mortar comes in a double-layered paper bag, weighing 25kg.
·It can be stored for up to 12 months in a place isolated from moisture.
·It is available in sandstone color.
·Each pallet contains 48 sacks (1.200kg).
Single-component, fiber-reinforced, shrinkage-compensated mortar for paving, specialized in the horizontal theming of the ESTonetex System: decorative paving, reliefs, carved ashlars, stamped with molds and stone finishes for theme parks, walkways and large outdoor surfaces.
Available in sandstone color.
Designed specifically for the theming of horizontal surfaces, ESTonetex Pavement allows you to create floors with the appearance of natural stone, carved blocks or custom textures using molds and prints, also providing high mechanical resistance and resistance to heavy traffic — ideal for theme parks, leisure areas, resorts and any space with high public traffic.
·Thematic one-component, fiber-reinforced and shrinkage-compensated mortar, specifically designed for horizontal pavements of the ESTonetex System.
·It allows you to shape, sculpt, mold and stamp: carved stone, ashlars, reliefs and various textures on the ground.
·Application in thicknesses of 1 to 2 cm per pass, ideal in pavements where large screeds cannot be carried out.
·Compression resistance class CS IV according to UNE-EN 998-1, with actual values ≥ 20 N/mm² (more than three times the minimum required for this class).
·Flexural tensile strength ≥ 6 N/mm².
·Reaction to fire Euroclass A1.
•High hardness and resistance to heavy traffic — withstands the constant passage of visitors.
·High resistance, can be projected by machine or manually.
·Waterproof to rainwater and permeable to water vapor.
• Excellent adhesion to cementitious substrates, concrete (with EST-S Imprimer bonding bridge) and leveling mortars.
·Knead with 4,25-5,25 liters of clean water per 25 kg bag (± 19%), manually or with an electric mixer, until a homogeneous mixture without lumps is obtained, and let it rest for 5 minutes.
·Apply in thicknesses of 10 to 20 mm per pass.
·It is recommended to incorporate fiberglass mesh as reinforcement, especially in large areas or volumes.
·Shape the volume with spatulas, trowels, trowels or stamping while the material is fresh.
·Once hardened, sand and sculpt the details and pigment with EST-Silcopin, EST-Monocrom or EST-Multipol.
·Apply the EST-Floor mineral water repellent at the end, for greater protection against foot traffic and weathering.
·Do not apply below 5ºC or above 35ºC, or if there is a risk of frost, rain or strong wind.
·Respect perimeter and structural joints; on surfaces larger than 20 m² provide for construction joints.
·The mortar comes in a paper bag, weighing 25kg.
·It can be stored for up to 12 months in a place isolated from moisture, in its original packaging.
·Available in sandstone color.
·Each pallet contains 48 sacks (1.200kg).
It is a thixotropic, sulfur-resistant mortar specially developed for theming work in immersion with salt, chlorinated and marine water.
Available in grey.
It is additive with the mineral silicate EST-26 Multilite (1 part EST-26 x 5 parts water) or can be mixed directly with water.
ESTonetex Extreme SR-MR is the only thixotropic, sulfate-resistant mortar on the market, specially designed for theming areas immersed in or in continuous contact with seawater. Its advanced formulation, combined with EST-26 Multilite mineral silicate, provides maximum resistance and durability in the most aggressive environments.
It offers outstanding manageability, allowing the creation of shapes and volumes without sagging, and stands out for its high resistance to chlorinated, marine and salt water, guaranteeing a solid, stable and durable finish even in the most extreme conditions.
·Thematic mortar that is moldable, moldable and projectable for theming, thanks to its composition it allows for the creation of shapes and volumes with great thicknesses.
·The mortar can be additive with EST-26 Multilite mineral silicate (1 part EST-26 Multilite x 5 parts water), the resulting mixture is added to the mortar; or it can be mixed directly with water.
·To reproduce natural elements such as stone, rock, wood or trunk in areas immersed in or in continuous contact with water such as aquariums, fountains or waterfalls.
·It has great elasticity which allows volumes of up to 20 cm (in several layers) to be made, whether projected by machine or applied by hand.
· Yield of 18-20 kg/m2 at 1 cm thickness (minimum recommended), yield may vary depending on the surface.
·It can be pigmented with both powder patinas and mineral silicate and mineral pigments.
·It can be applied both indoors and outdoors, and is resistant to seawater, salt water and chlorinated water.
·Verified mechanical resistance (official technical sheet): >=20 N/mm² in compression, tripling the standard norm of 6 N/mm² with correct curing.
•Binder with lower CO2 emissions, reducing the carbon footprint compared to other commonly used mortars.
·It can be applied to surfaces in continuous contact with water such as aquariums, waterfalls, fountains, etc.
·Mix with 4,5 – 5L of mix (EST-26 Multilite + water) or water, until a homogeneous paste is obtained.
·It is recommended to let the material rest for 5 minutes before applying it.
·Do not apply the material when there is a risk of heavy rain, snow or frost.
·The application temperature ranges between 5ºC and 30ºC; when these temperatures are exceeded, it is advisable to take precautions.
·The mortar can be applied directly onto surfaces of EST-Mesh 80 gr mesh, plastic mesh, nervometal, brick or thermoclay.
·If applying to concrete surfaces, they must be treated beforehand.
·To apply large thicknesses, it must be done in several layers.
·The EST-3 Plus water repellent must be applied once the work is completed.
·Recommended thickness: 1 to 15 cm in one coat, up to a maximum accumulated thickness of 15-20 cm in several layers.
·The mortar comes in a double-layered paper bag, weighing 25kg.
·It can be stored for up to 12 months in a place isolated from moisture.
·It is available in gray.
·Each pallet contains 48 sacks (1.200kg).
It is a fiber-reinforced bonding mortar specially developed for direct application onto EPS or XPS expanded polystyrene.
Available in grey.
ESTonetex Fibrax is the only fiber-reinforced mortar on the market, specially formulated for direct application onto EPS or XPS expanded polystyrene. Its innovative composition allows it to be mixed with just water, eliminating the need for EST-Mesh 80g mesh.
It offers exceptional adhesion to expanded polystyrene of any density and superior resistance, simplifying the application process by eliminating the need for both mesh and a second layer of mortar.
·Grip mortar for EPS and XPS polystyrene of any density, for theming and high decoration work.
·To reproduce natural elements such as stone, rock, wood or trunk, making high-end decorative sets and stage sets.
·It can be applied manually, with a pneumatic plastering machine or a spraying machine.
· Yield of 12-13 kg/m2 at 1 cm thickness, the yield may vary depending on the thickness applied.
·It can be applied both indoors and outdoors.
·Avoid having to place EST-Mesh 80 gr mesh in the polystyrene or the 2nd layer of mortar.
·Verified mechanical resistance (official technical data sheet): >15 N/mm² in compression and >4 N/mm² in flexural tension (28 days).
·It cannot be applied to surfaces in continuous contact with water.
·Recommended thickness: minimum 5 mm up to maximum 20 mm.
·It is recommended to let the material rest for 5 minutes before applying it.
·Do not apply the material when there is a risk of heavy rain, snow or frost.
·The application temperature ranges between 5ºC and 30ºC; when these temperatures are exceeded, it is advisable to take precautions.
·The mortar can be applied directly onto EPS or XPS expanded polystyrene of any density.
·It is not necessary to place EST-Mesh 80 gr. mesh.
·It is recommended to leave the mortar with a rough appearance, so that the 2nd layer has a better grip.
·The mortar comes in a double-layered paper bag, weighing 25kg.
·It can be stored for up to 12 months in a place isolated from moisture.
·The mortar is available in grey.
·Each pallet contains 48 sacks (1.200kg).
It is a thixotropic mortar with lime specially developed for the restoration of historical heritage and natural stone.
Available in sandstone color.
It is additive with the mineral silicate EST-26 Multilite (1 part EST-26 x 6 parts water).
ESTonetex Restaura is the only thixotropic mortar designed for the restoration of natural stone in historic buildings such as churches, castles or town halls.
Its composition with lime and mineral silicate EST-26 Multilite offers excellent adhesion and thixotropy, allowing for smooth, sagging work. Furthermore, it guarantees a perfect mineral bond, creating a natural connection with the original surface.
·Thematic mortar that is moldable, sprayable and thematic with lime for restoration and rehabilitation; thanks to its composition, it allows for the creation of shapes and volumes with large thicknesses.
·The mortar is added with EST-26 Multilite mineral silicate (1 part of EST-26 Multilite x 6 parts of water), the resulting mixture is added to the mortar.
·To reproduce natural elements such as stone, rock, brick on facades, walls or partitions of historic buildings and private homes.
·It has great elasticity which allows volumes of up to 20 cm (in several layers) to be made, whether projected by machine or applied by hand.
· Yield of 16 kg/m2 at 1 cm thickness (minimum recommended), yield may vary depending on the surface.
·It can be pigmented with both powder patinas and mineral silicate and mineral pigments.
·It can be applied both indoors and outdoors, and is resistant to environmental wear and tear (rain, wind, snow, etc.).
·Never apply to surfaces in continuous contact with water such as aquariums, waterfalls, fountains, etc.
·Recommended thickness: minimum 1 cm up to maximum 20 cm.
·Mix with 4,5 – 5L of mixture (EST-26 Multilite + water), until a homogeneous paste is obtained.
·It is recommended to let the material rest for 5 minutes before applying it.
·Do not apply the material when there is a risk of heavy rain, snow or frost.
·The application temperature ranges between 5ºC and 30ºC; when these temperatures are exceeded, it is advisable to take precautions.
·The mortar can be applied directly onto natural stone surfaces.
·A consolidant must be applied to the natural stone (EST-26 Multilite or EST-Multilitio) before applying the mortar.
·To apply large thicknesses, it must be done in several layers.
·It is recommended to apply EST-7 water repellent for greater protection.
·The mortar comes in a double-layered paper bag, weighing 25kg.
·It can be stored for up to 12 months in a place isolated from moisture.
·It is available in sandstone color.
·Each pallet contains 48 sacks (1.200kg).
Traditional lime and gypsum mortar for smooth and textured interior finishes, 100% natural and free of chemical additives. Ideal for interior decorating seeking a natural, breathable, and healthy finish.
Available in a color chart.
TrabiCal provides a beautifully natural finish and a comfortable feel, thanks to its traditional composition free of chemical additives. Its high water vapor permeability and compatibility with mortars and existing materials make it the ideal choice for interior design projects seeking an authentic, breathable, and healthy result.
·Traditional lime and gypsum mortar, 100% natural composition without chemical additives, for smooth and textured interior finishes.
·Especially recommended for interior decoration due to its natural beauty and compatibility with mortars and old materials.
·It can be colored throughout and made water-repellent; available in a color chart.
·For exclusive use on interior vertical surfaces, as it is a completely natural product.
·Compressive strength 7,8 N/mm² according to UNE-EN 1015-11.
·Flexural strength 1,6 N/mm² according to UNE-EN 1015-11.
·Adhesion to concrete 0,2 N/mm² and to ceramic substrate 0,4 N/mm² according to UNE-EN 1015-12.
·Reaction to fire Euroclass A1.
•High water vapor permeability (μ 8,1-8,6), ideal for walls that need to breathe.
·Application thickness of 2 to 12 mm in a single layer.
·Knead with the indicated amount of water (approx. 30%), manually or with an electric mixer at low speed, until you obtain a homogeneous, lump-free and workable paste.
·Apply EST-S Imprimer on the surface previously.
·Apply in a single layer 2 to 12 mm thick.
·For thicknesses up to 9 mm, apply in successive layers, exerting light pressure on the first layer to promote adhesion.
·Surface preparation (flossing or smoothing) should be carried out between 0 and 80 minutes after application, depending on environmental conditions.
·On heterogeneous supports, it is recommended to embed 145gr fiberglass mesh in a first layer of 4-5 mm to minimize microcracks.
·Apply at temperatures between 5ºC and 35ºC, protecting the fresh mortar from frost and from setting too quickly.
·In dry and hot weather, avoid direct exposure to the sun and wind during curing.
·Being a natural material, it dries faster than other mortars (maximum workability 80 minutes).
·Apply EST-3 once the work is completed.
·The mortar comes in plastic buckets, weighing 25kg.
·It can be stored for up to 12 months in a place isolated from moisture, in its original packaging.
·Available in color chart.
·Each pallet contains 27 cubes (675kg).
Highly thixotropic mortar based on gray cement, with a high water-repellent content, especially suitable for high-end and luxury decorative work, both indoors and outdoors. It allows for the creation of themed landscapes, figures, rocks, tree trunks, and reliefs through molding and stamping, as well as ornamental elements on facades.
Available in black color.
ESTonetex ARTROCK GR is specially formulated for high-end decorative work, allowing for the highly detailed imitation of landscapes, rocks, tree trunks, and reliefs through molding and stamping. Its high thixotropy and abundant water-repellent content guarantee a durable finish for both interior and exterior applications, ideal for ornamental elements on facades and exclusive decorative projects.
·High thixotropy mortar based on gray cement, siliceous and calcareous aggregates, with a large amount of water-repellent material.
·Especially suitable for high-end and luxury decorative work, both indoors and outdoors.
·It allows the creation of themed and imitated landscapes, figures, rocks, trunks and reliefs through molding and stamping.
·Ideal for ornamental elements on facades: plinths, skirting boards, ashlars, etc.
·Application thickness of 10 to 60 mm in a single layer; for greater thicknesses, reinforce with EST-Mesh 80gr.
·Approximate yield of 14 kg/m² at 10mm thickness.
·Compression resistance class CSIV according to UNE-EN 998-1 (≥6 N/mm²).
·Reaction to fire Euroclass A1.
·Capillary water absorption coefficient W2 (impermeable to rainwater).
•Reduced shrinkage (<1,2 mm/m), minimizing the appearance of cracks.
·Available pigmented in black.
·Mix with 5-6 liters of clean water, using a concrete mixer, by hand or with an electric mixer, until you obtain a homogeneous, lump-free and workable paste.
·If the application is mechanical, adjust the water/mortar ratio by trial and error according to the section and length of the hose.
·Apply in a single layer of 10 to 60 mm thickness; for thicknesses greater than 60 mm, apply in several layers and reinforce with EST-Mesh 80gr.
·Surface treatment is carried out between 4 and 12 hours after application, depending on environmental conditions, thickness and type of surface.
·On concrete or very smooth surfaces, treat beforehand with ESTonetex Forte to improve adhesion.
•Reinforce the joints between materials and the weak points of the support with EST-Mesh 80gr in the first layer.
·Apply at temperatures between 5ºC and 35ºC, protecting the fresh mortar from frost and from setting too quickly.
• Ventilate indoor spaces after application until completely dry, avoiding sudden temperature changes; do not apply in strong winds.
·Once dry, pigment with EST-Silcopin, EST-Monocrom or EST-Multipol and apply the EST-3 Plus mineral water repellent for greater protection.
·The mortar comes in plastic buckets, weighing 25kg.
·It can be stored for up to 12 months in a place isolated from moisture, in its original packaging.
·Available in black.
·Each pallet contains 27 cubes (675kg).
Decorative, shrinkage-compensated mortar for thin-layer application (1-10 mm) directly onto EPS or XPS, and other surfaces with poor adhesion. It allows for highly detailed reproduction of stones, rocks, wood, and sculptures in theme parks and all types of decorative applications.
Available in black color.
ESTonetex ARTROCK FI stands out for its high adhesion, plasticity, and thin-layer hardness, allowing for perfect adaptation to polystyrene substrates to achieve highly natural textures and finishes. Its low CO2 emissions formulation makes it the ideal choice for coating large EPS and XPS surfaces without requiring excessive thickness.
·Decorative and shrinkage-compensated mortar, for application in a thin layer of 1 to 10 mm directly onto EPS or XPS, and surfaces with difficult adhesion.
·It allows for the reproduction in great detail of stones, rocks, wood, sculptures and all kinds of decorations in theme parks.
·20% reduction in CO2 emissions.
•High adhesion to EPS, XPS, mineral wool (MW) and support.
·Compressive strength ≥ 8,0 N/mm².
·Flexural tensile strength ≥ 2,0 N/mm².
• Tensile adhesion to concrete ≥ 8,0 N/mm².
•High deformability, absorbs differential stresses in the hardened state.
•High impact resistance and excellent workability.
·Waterproof to rainwater and permeable to water vapor.
·Available in black.
Knead with 7,25-8,25 liters of water per 25 kg bucket, manually or with an electric mixer, until you obtain a smooth, creamy paste without lumps. Let it rest for 5 minutes.
·Make small holes in the EPS or XPS for mechanical anchoring to improve adhesion.
·Spread with a spatula, trowel or spray gun, pressing the entire surface, with a thickness of 2 to 10 mm (up to 15 mm in volumetric applications).
·Place fiberglass mesh (145 or 160 gr/m²) in the first 2-5 mm of thickness to improve strength.
·The open time is approximately 30 minutes under normal conditions; it may be reduced with high temperatures or wind.
·While the mortar is still damp, sprinkle EST-Decor colored patinas to give greater realism to the theme.
·Do not apply below 5ºC or above 30ºC, or if there is a risk of frost, rain or strong winds.
·In hot weather (above 30ºC), protect with shade netting and moisten to control drying.
·Once dry, pigment with EST-Silcopin, EST-Monocrom or EST-Multipol and apply the EST-3 Plus mineral water repellent for greater protection.
The mortar comes in plastic buckets, weighing 25kg.
·It can be stored for up to 12 months in a place isolated from moisture, in its original packaging.
·Available in black.
·Each pallet contains 27 cubes (675kg).
Decorative plaster mortar, based on cement, selected aggregates and a large amount of water-repellent material, especially suitable for facades with a textured, scraped or troweled finish.
Available in white.
TEXTUREST is the ideal solution for cladding brick, concrete block, or exposed concrete facades with a durable, single-layer finish. Its high water-repellent content and scraped or textured finish make it the perfect choice for long-lasting facade coatings. Ideal for large-scale projects such as resorts, developments, or villas.
·Mass colored single-layer plaster mortar, based on cement, selected aggregates and a large quantity of water-repellent material.
·Especially suitable for brick facades, concrete block, concrete and plaster in good condition.
·Scraped or textured finish.
·Thickness of 8 to 20 mm per layer; in successive layers, up to a total maximum of 30 mm.
·Compressive strength class CSII according to UNE-EN 998-1.
·Reaction to fire Euroclass A1.
·Capillary water absorption coefficient W2 (impermeable to rainwater).
•Reduced shrinkage (<0,9%), minimizing the appearance of cracks.
·Approximate yield of 1,5 kg/m² per mm of thickness.
·Available in white.
·Check that the joints between bricks are well filled to avoid excessive material consumption.
·On concrete or very smooth surfaces, pre-treat with EST-S Imprimer or EST-Silcopin to improve adhesion.
·It is always recommended to place fiberglass mesh, embedded in the first layer and covered with the same mortar.
·Mix with the indicated amount of water (21%), using a concrete mixer, by hand or with an electric mixer, until you obtain a homogeneous, lump-free and workable paste.
·If the application is mechanical, adjust the water/mortar ratio by trial and error according to the section and length of the hose.
·Apply in a single layer 8 to 20 mm thick; for greater thicknesses, apply in successive layers, leaving the surface of the first layer rough.
·The surface treatment (scraping) is carried out between 1,5 and 4 hours after application, depending on environmental conditions.
·On heterogeneous supports, embed fiberglass mesh in the first layer to minimize microcracks.
·Apply at temperatures between 5ºC and 35ºC, protecting the fresh mortar from frost and from setting too quickly.
•Ventilate indoor spaces after application until completely dry; do not apply in strong winds.
·Apply paints or finishing coatings only when the plaster is completely dry.
·Once finished, apply the EST-3 Plus mineral water repellent for greater protection.
·The mortar comes in a paper bag, weighing 25kg.
·It can be stored for up to 24 months in a place isolated from moisture, in its original packaging.
·Available in white.
·Each pallet contains 48 sacks (1.200kg).
FAQ
ESTonetex TXT is the most versatile for interior and exterior use, ideal for facades, warehouses, walls and decorative elements in general.
ESTonetex Extreme, specifically designed for areas in continuous contact with salt or chlorinated water such as swimming pools, aquariums or water parks.
Extreme SR-MR is the sulfate-resistant version, designed for marine water and more aggressive environments; Extreme covers standard salt and chlorinated water.
ESTonetex Fibrax (no mesh required) or ESTonetex Forte (thin layer, for sculptures and lightweight pieces).
ESTonetex TXT has certifications for its fire resistance system and urea properties. These documents are available upon request via the contact form.
Depending on the mortar, the bags range from 25kg (mostly) to specific formats such as the 17-18,5kg of NHL hydraulic limes. Pallets contain 48 bags in most cases.
Made in Spain by Estecha Reproducciones, with over 30 years of experience in the development of specialized mortars for theming.
The technical data sheet is available directly on each mortar. The safety data sheet and certifications can be requested via the contact form.
